Spesifikasi:
TECHNICAL INFORMATION:
Type :ACRYLIC RESIN
Color :WHITE
Film appearance :MATT
Solid by volume 44.0 ± 2.0 %
Solid by weight 40.0 ± 2.0 %
Flash point - °C
Volatile organic compounds (VOCs)- gram / liter
Wet film thickness 100 microns
Dry film thickness 50-60 microns
Theoretical coverage. 8-9 sqm/litre/coat
Remark - Actual Surface coverage will depend on surface irregularities, Mixing, Application Condition
method and technique; as well as the structure and dimensions of the object to be coated.
Touch dry ( 25-30 °C) 30-40 minutes.
Recoat dry ( 25-30 °C) 1 hours.
Full cure ( 25-30 °C) 1 days.
APPLICATION:
Tools : Brush and Roller
Thinner No. : Clean water
Dilution (%) : 10-20% by volume
APPLICATION SYSTEM:
Surface Preparation
New surface : Allow the surfaces dry at least 2 days in case of speedy work.
: The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants.
: TOA 301 Acrylic Sealent or TOA Acrylic Filler is used to repair all cracks and rough surfaces.
Old surface :The surfaces must be clean and free of dirt,wax,salt,old paint and other contaminants.
: Chalky surfaces or loose material must be removed by stiff brush.
: TOA113 Microkill is used to get rid of algae and fungi that left on the surfaces.
: The surfaces must be clean with suitable cleansing solution and water then rinse thoroughly with
fresh water and allow to fully dry.
: TOA 301 Acrylic Sealent or TOA Acrylic Filler is used to repair all cracks and rough surfaces.
Coating system
Primer : Apply by brush with TOA Quick Primer waterbase at least 1 coat.
Topcoat : Can be topcoat with Acrylic Emulsion Paint and Alkyd Base Enamel Paint.
Recommendation : The temperature of the substrate should be minimum 10°C and at least 3°C above the dew point of
the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation
is required in confined areas to ensure correct drying.
Dimensi:
Deskripsi:
FEATURES:
TOA Quick Primer Waterbase is based on acrylic Emulsion that designed for use as pigmented primer.
The properties of this product are excellent alkaline resistance and superior pH balance that protect
topcoat from efflorescence in cement materials after drying for 2 days. This product is super
bonding agent that provides excellent adhesion between the substrates and paint film as well as it
forms a breathable film that allows the releast of water vapor from substrates through out of the paint
film to eliminate the risk of blistering.
Suitable for Skimcoat substrate , Concrete , Brick , Plaster and Cement .
